http://gb.pad.constantvzw.org/p/documentation
++++++++++++++++++++++++++++++++++++

Workshop with ginger
kinect install party

INSTALL software
Windows
very tricky to have FLOSS options.. maybe with openframeworks with extreme fiddling.
plenty of proprietary though (skanect, reconstructme ecc..)

Mac
http://openkinect.org/wiki/Getting_Started#Homebrew

Ubuntu/Debian
using libfreenect and openframeworks(?)
http://openkinect.org/wiki/Getting_Started#Ubuntu.2FDebian
http://openframeworks.cc/setup/linux-codeblocks/
with debian there is some dependency trouble.. guess what!

with ubuntu 14, watch out for package installs that are embedded in the instructions....i had to change the following....

Ubunti 14 conflict problem it seems that I have a conflict with my webcam gspca_main says: FATAL: Module gspca_main is in use.
I give up prefer to use kinnect on an other computer probably it my webcame that uses the port
> ORIGINAL
sudo apt-get install git-core cmake libglut3-dev pkg-config build-essential libxmu-dev libxi-dev libusb-1.0-0-dev
git clone git://github.com/OpenKinect/libfreenect.git
cd libfreenect
mkdir build
cd build
cmake ..
make
sudo make install
sudo ldconfig /usr/local/lib64/
sudo glview

> MODIFIED
sudo apt-get install git-core cmake freeglut3-dev pkg-config build-essential libxmu-dev libxi-dev libusb-1.0-0-dev
git clone git://github.com/OpenKinect/libfreenect.git
cd libfreenect
mkdir build
cd build
cmake ..
make
sudo make install
sudo ldconfig /usr/local/lib64/
freenect-glview


We scanned a plant using Skanect
Scan of 'human object'
We cleaned up the STL-image in meshlab

Phil repurposed a script from relearn to grab depth from the freenect RGB preview!
And here it is! You will need to download processing to use this....
https://github.com/phiLangley/depthMesh

Cleaning up a scan in Meshlab: http://en.wikiversity.org/wiki/MakerBot/Cleaning_Up_Point_Cloud_Meshes_in_Meshlab_For_3D_Printing